Black Diamond Rubber Firefighter Boot Black Diamond Rubber Firefighter Boot Black Diamond Rubber Firefighter Boot
Black Diamond

Black Diamond Rubber Firefighter Boot

Current Stock:
SKU: BD-9451

Black Diamond Rubber Firefighter Boot
Stock No. 699-9451


Not all rubber boots are made the same, Black Diamond Rubber Fire Boots provide maximum protection with all-day comfort and support. Each pair includes Ortholite footbeds which provide unmatched comfort which are the best in the fire service. Try a pair and feel the difference.

COMFORT FIT:
The foot form ("last") used to construct these boots has been designed for maximum comfort and accurate fit. A larger, naturally shaped steel toecap is used to allow complete freedom of toe movement. The heel area is anatomically tapered to hold your heel snugly and comfortably in place, eliminating “heel slip”

COMFORT FIT WITH ORTHOLITE:
The Comfort Fit System is built upon a removable Ortholite footbed that is breathable, long-lasting and durable. Below the footbed is a high-density polyurethane midsole which absorbs energy and provides cushioning


This product has also received certification to the following:

  1. Federal OSHA 29 CFR 1910, 156(e)(2) effective July 1, 1992
  2. Cal OSHA title 8 G150 Section 3408 effective April 30, 1985


CSA Standards:

  • Steel Toe: 93 ft./lb. Drop Test
  • Steel Plate: 300 lb. Penetration Test
  • E.S.R (EH): 18 kv Test


Specifications:

Boot Height:   11"
Lower Midsole:   9.5 mm coated felt
Insulation:   4.8 mm open cell foam
Leg Lining:   Kevlar/Nomex with 1.2 mm coating
Toe Lining:   0.76 mm net lining calendar coated
Lining Construction:   Stitched down linings ensure no liner pull-out. High abrasion ballistic nylon heel non-slip provides maximum wear and secure fit.
Footbed:   OrthoLite, breathable polyurethane sock liner for better performance extra cushioning, drier, and healthier environment under the foot
Tibia Protector:   3.5 mm heavy corrugated roll
Steel Toe:   Meets or exceeds standards listed below
Steel PR Plate:   Stainless steel - meets or exceeds standards listed below
Steel Shank:   Double ridged steel
Outsole:   One piece molded K-Lug design
Pull on Loops:   Rubber coated pull-on loops for durability



Full Description
SKU: BD-9451
Qty
  • Description

    Black Diamond Rubber Firefighter Boot
    Stock No. 699-9451


    Not all rubber boots are made the same, Black Diamond Rubber Fire Boots provide maximum protection with all-day comfort and support. Each pair includes Ortholite footbeds which provide unmatched comfort which are the best in the fire service. Try a pair and feel the difference.

    COMFORT FIT:
    The foot form ("last") used to construct these boots has been designed for maximum comfort and accurate fit. A larger, naturally shaped steel toecap is used to allow complete freedom of toe movement. The heel area is anatomically tapered to hold your heel snugly and comfortably in place, eliminating “heel slip”

    COMFORT FIT WITH ORTHOLITE:
    The Comfort Fit System is built upon a removable Ortholite footbed that is breathable, long-lasting and durable. Below the footbed is a high-density polyurethane midsole which absorbs energy and provides cushioning


    This product has also received certification to the following:

    1. Federal OSHA 29 CFR 1910, 156(e)(2) effective July 1, 1992
    2. Cal OSHA title 8 G150 Section 3408 effective April 30, 1985


    CSA Standards:

    • Steel Toe: 93 ft./lb. Drop Test
    • Steel Plate: 300 lb. Penetration Test
    • E.S.R (EH): 18 kv Test


    Specifications:

    Boot Height:   11"
    Lower Midsole:   9.5 mm coated felt
    Insulation:   4.8 mm open cell foam
    Leg Lining:   Kevlar/Nomex with 1.2 mm coating
    Toe Lining:   0.76 mm net lining calendar coated
    Lining Construction:   Stitched down linings ensure no liner pull-out. High abrasion ballistic nylon heel non-slip provides maximum wear and secure fit.
    Footbed:   OrthoLite, breathable polyurethane sock liner for better performance extra cushioning, drier, and healthier environment under the foot
    Tibia Protector:   3.5 mm heavy corrugated roll
    Steel Toe:   Meets or exceeds standards listed below
    Steel PR Plate:   Stainless steel - meets or exceeds standards listed below
    Steel Shank:   Double ridged steel
    Outsole:   One piece molded K-Lug design
    Pull on Loops:   Rubber coated pull-on loops for durability



  • Reviews

    Reviews

    Be the first to