CET 18hp High Pressure/Volume Vanguard Firefighting Pump

The 18hp High Pressure/Volume Vanguard Firefighting Pump is the most suitable for drop-in units. The engine and pump are mounted on a steel protective frame with folding handles.

Flows:
370 GPM @ 25 PSI
250 GPM @ 50 PSI
150 GPM @ 75 PSI
90 GPM @ 100 PSI
15 GPM @ 125 PSI



Engine Specifications:

• Vanguard, model 350000, air cooled engine
• V-Twin cylinder, 4-stroke gasoline engine
• Electric start with recoil start as backup
• 2.25 Gallons (8.5 l) integrated fuel tank

Pump Unit Specifications:

• C.E.T. single stage centrifugal pump
• Pump body made from high resistance aluminum alloy
• Bronze impeller
• Mechanical shaft seal
• Exhaust priming system, guaranteed up to 20' (6 meter) lift
• Two 2-1/2" (65 mm) delivery outlets with Fire Type swing-out valve
• One 4" (100 mm) suction inlet
• Dimensions: Length: 23.5" (575 mm); Width: 22" (539 mm); Height: 25.5" (625 mm).
• Weight: 189 lbs (86 kg)

Included accessories:

• Full control panel with pressure gauge, vacuum gauge, throttle, choke, starter, panel light and priming valve
• 16 Amps alternator
• Low oil alert
• 12-V battery