CET 23hp Vanguard Powered Pressure and Volume Pump

Flows:


The 23hp Vanguard Powered Pressure and Volume Pump is most suitable for drop-in units. The engine and pump are mounted on a skid frame. The skid version is easily mountable on vehicles and trailers.

Engine specifications:

• Vanguard, model 380000, air cooled engine
• V-Twin cylinder, 4-stroke gasoline engine
• Electric start with recoil start as backup
• Inlet with NPT thread (other threads available on request)
• Outlet down right with NPT Threads
• Control panel Quick connector instead of battery
• Separate gas tank not included

Pump unit specifications:

• CET single stage centrifugal pump
• Pump body made from resistant aluminum alloy
• Bronze impeller
• Steel pump shaft
• Mechanical shaft seal
• Exhaust priming system, guaranteed up to 20' (6 meter) lift
• One - 1.5" (38 mm) NPT-M delivery outlet flange
• One - 2.5" (65 mm) suction inlet
• Dimensions: Length - 19.5" (500 mm); Width - 22.5" (570 mm); Height - 25.5" (650 mm)
• Weight: 147.4 lbs. (67 kg)
• Control panel and quick connector

Included Accessories:

• 20 Amps alternator
• Pressure gauge
• Low oil alert
• Quick connect for 12-V battery

Warranty:
3 Years Limited