CET 2hp Honda Powered Fire Pump CET 2hp Honda Powered Fire Pump
CET Fire Pumps

CET 2hp Honda Powered Fire Pump

Current Stock:
SKU: PFP-2HP-HND-M

CET 2hp Honda Powered Fire Pump

The CET 2HP Honda Powered Fire Pump is the smallest and lightest pump of our line up. It's very easy to carry around and will ensure that you can access any remote location.

Flows:
MAX FLOW: 85 GPM
MAX PRESSURE: 60 PSI
75 GPM @ 10 PSI
55 GPM @ 25 PSI
25 GPM @ 50 PSI




Engine:

  • GXH50 Honda air cooled engine
  • Single cylinder, 4-stroke gasoline engine
  • Recoil start
  • 0.2 gallon (0.77 l) integrated fuel tank


Includes:

  • Low oil alert


Pump:

  • Direct drive C.E.T. single stage centrifugal pump
  • Pump body made from resistant aluminum alloy
  • Aluminum impeller
  • Mechanical shaft seal
  • Hand priming system; guaranteed up to 6’ (2 m) lift
  • One 1 1/2“ (38 mm) delivery outlet with 1/4-turn ball valve
  • One 1 1/2“ (38 mm) suction inlet
  • Dimensions: Length: 13“ (330 mm); Width: 16 1/2“ (419 mm); Height: 16“ (406 mm)
  • Wet weight : 31 lbs (14kg)


*It is highly recommanded to use a foot valve at the end of the suction hose. It will be easier to prime the pump.

Full Description
SKU: PFP-2HP-HND-M
Qty
  • Description

    CET 2hp Honda Powered Fire Pump

    The CET 2HP Honda Powered Fire Pump is the smallest and lightest pump of our line up. It's very easy to carry around and will ensure that you can access any remote location.

    Flows:
    MAX FLOW: 85 GPM
    MAX PRESSURE: 60 PSI
    75 GPM @ 10 PSI
    55 GPM @ 25 PSI
    25 GPM @ 50 PSI




    Engine:

    • GXH50 Honda air cooled engine
    • Single cylinder, 4-stroke gasoline engine
    • Recoil start
    • 0.2 gallon (0.77 l) integrated fuel tank


    Includes:

    • Low oil alert


    Pump:

    • Direct drive C.E.T. single stage centrifugal pump
    • Pump body made from resistant aluminum alloy
    • Aluminum impeller
    • Mechanical shaft seal
    • Hand priming system; guaranteed up to 6’ (2 m) lift
    • One 1 1/2“ (38 mm) delivery outlet with 1/4-turn ball valve
    • One 1 1/2“ (38 mm) suction inlet
    • Dimensions: Length: 13“ (330 mm); Width: 16 1/2“ (419 mm); Height: 16“ (406 mm)
    • Wet weight : 31 lbs (14kg)


    *It is highly recommanded to use a foot valve at the end of the suction hose. It will be easier to prime the pump.

  • Reviews

    Reviews

    Be the first to