CMC HD ProSeries Pulleys

The CMC HD ProSeries Pulleys have been built workhorse tough to deliver years of dependable service.

Features:

• Large high-efficiency anodized aluminum sheave
• High-strength sealed bearings that minimize loss of mechanical advantage and will deliver optimum performance haul after haul
• Side plates constructed of machined aircraft-grade aluminum, with smooth rounded edges to minimize rope fraying
• Wide attachment point that supports multiple rescue-size carabiners
• PMP (Prusik-Minding Pulley) bottom shaped for maximum efficiency with Prusik hitches and also works well with mechanical rope-grabs
• Do not load a single side only of a double sheave pulley

Working-At-Height / Industrial Rope Access / Technical Rope Rescue:
Working at height requires reliable, quality equipment. The HD Pulleys can be used with confidence in work-at-height maneuvers for industrial rope access or technical rope rescue when used in accordance with the regulatory safety standards they fall under. Always use life safety equipment and gear according to the regulatory safety standards for which it is classified and/or certified.

Option:

Item:

Weight:

Sheave Thread Size:

Pulley Dimensions (H x W):

Type:

Color:

NFPA Rating:

3 Sigma MBS

HD2

300441

13 OZ (367 G)

2-1/4 X 1/2 IN (57 X 13 MM)

5-3/4 X 4-1/4 IN (14.5 X 10.75 CM)

Single

Gray

General Use

56 KN (12,588 LBF)

HD2 Double

300442

1.3 LB (605 G)

2-1/4 X 1/2 IN (57 X 13 MM)

6-1/2 X 3-3/4 IN (16.5 X 9.5 CM

Double

Gray/Red

General Use

56 KN (12,588 LBF)

HD4

300461

1.9 LB (850 G)

3-3/4 X 1/2 IN (95 X 13 MM)

7-3/4 X 5-1/2 IN (19.75 X 14 CM)

Single

Gray

General Use

46 KN (10,340 LBF)