Federal Signal Rumbler Siren
Federal Signal

Federal Signal Rumbler Siren

$991.49 - $1,085.97
Current Stock:
SKU: FS-RUMBLER-3

Federal Signal Rumbler Siren

The Federal Signal Rumbler Siren is particularly effective for Police and Fire/EMS applications when used in dense urban environments with heavy vehicle and pedestrian traffic.

Improves Intersection Warning Effectiveness
The Rumbler introduces a revolutionary new concept to audible warning through its ability to interact with most 100/200-watt siren amplifiers and provide secondary, low frequency duplicate tones.

Secondary System with Built-in Safety
The Rumbler system senses the primary siren tone signal, and reduces the signals' frequency by 75 percent. It then amplifies the sound through a pair of high output woofers. The system's timer allows the tone to sound for eight seconds, providing highly effective warning at hazardous intersections, and then automatically shuts off.

A complete Rumbler intersection-clearing system consists of an amplifier, with built-in timer and two subwoofers. Vehicle specific mounting hardware is ordered separately. This system can be paired with most 100/200-watt emergency siren amplifiers.

Features:

  • Improves emergency vehicle operator safety
  • Produces penetrating/vibrating low frequency siren sound waves
  • Interacts with most 100/200-watt emergency vehicle siren amplifiers
  • Enabled via any emergency vehicle steering wheel horn ring
  • Eight second safety timer provides automatic tone shutdown
  • Three-year warranty


Specification:

Voltage:  9-15 VDC
Operating Current:  12A max
Polarity:   Negative ground only
Standby Current:  OmA nominal
Operating Temperature Range:  -30 degrees C to +65 degrees C
Frequency Ranges:  182 to 400 Hz
Output Voltage:  64 VDC (nominal) peak-to-peak
Output Power:  80W
Dim. (H x L x D):  Amplifier - 1.3" x 6.3" x 5.7" (3.5 cm x 15.6 cm x   14.5cm)
 Pair of Woofers - 8.5" x 7.3" (21.6 cm x 18.4 cm)
 Timer - 1.4" x 6.5" x 2.9" (3.6 cm x 16.5 cm x 2.9 cm)
Ship Weight:  19 lbs (8.62 kg)



Full Description
SKU: FS-RUMBLER-3
Mounting Kit *
Qty
  • Description

    Federal Signal Rumbler Siren

    The Federal Signal Rumbler Siren is particularly effective for Police and Fire/EMS applications when used in dense urban environments with heavy vehicle and pedestrian traffic.

    Improves Intersection Warning Effectiveness
    The Rumbler introduces a revolutionary new concept to audible warning through its ability to interact with most 100/200-watt siren amplifiers and provide secondary, low frequency duplicate tones.

    Secondary System with Built-in Safety
    The Rumbler system senses the primary siren tone signal, and reduces the signals' frequency by 75 percent. It then amplifies the sound through a pair of high output woofers. The system's timer allows the tone to sound for eight seconds, providing highly effective warning at hazardous intersections, and then automatically shuts off.

    A complete Rumbler intersection-clearing system consists of an amplifier, with built-in timer and two subwoofers. Vehicle specific mounting hardware is ordered separately. This system can be paired with most 100/200-watt emergency siren amplifiers.

    Features:

    • Improves emergency vehicle operator safety
    • Produces penetrating/vibrating low frequency siren sound waves
    • Interacts with most 100/200-watt emergency vehicle siren amplifiers
    • Enabled via any emergency vehicle steering wheel horn ring
    • Eight second safety timer provides automatic tone shutdown
    • Three-year warranty


    Specification:

    Voltage:  9-15 VDC
    Operating Current:  12A max
    Polarity:   Negative ground only
    Standby Current:  OmA nominal
    Operating Temperature Range:  -30 degrees C to +65 degrees C
    Frequency Ranges:  182 to 400 Hz
    Output Voltage:  64 VDC (nominal) peak-to-peak
    Output Power:  80W
    Dim. (H x L x D):  Amplifier - 1.3" x 6.3" x 5.7" (3.5 cm x 15.6 cm x   14.5cm)
     Pair of Woofers - 8.5" x 7.3" (21.6 cm x 18.4 cm)
     Timer - 1.4" x 6.5" x 2.9" (3.6 cm x 16.5 cm x 2.9 cm)
    Ship Weight:  19 lbs (8.62 kg)



  • Reviews

    Reviews

    Be the first to