-
Description
FoamPro 2000/2001 Series Models
The FoamPro 2000 series is available in two models, differing only in capacity.Voltage DC: Maximum Amps: Drive Source: Pump Flow Range: Model 2001: S105-2001 12 40 1/2 hp, DC .01 - 2.6 gpm Model 2002: S105-2001 12 60 3/4 hp, DC .01 - 5.0 gpm Each system includes a Hypro triplex plunger pump and DC (12 or 24 volt) motor assembly. Also included are a microprocessor control/display unit, instruction placard, strainer, foam injection check valve, complete shielded cable set and RFI/EMI suppression kit.
The system provides fully automatic foam proportioning, regardless of changes in flow or pressure, and offers convenient, push-button operation, making it the easiest system to use.
LED digital readouts provide real time performance information.
The optional advanced feature controller offers "auto-on" programming which automatically arms the proportioner when the fire pump is engaged.
Features:- Installs easily in new or existing apparatus
- No in-line restrictions
- Delivers unmatched accuracy over the widest range of flows
- Leading the industry in proven reliability
- Proportions continuously, with no stopping to refill
- Discharge side injection
- Provides the smoothest proportioning available at low flows
- Delivers 0.01 to 5.0 gpm (0.04 - 18.9 L/min)
- Achieves full pump capacity with all known Class A, Class B AFFF and most Class B AR-AFFF*
Control module features:- Ultra-bright LED digital readout
- Injection percentage from 0.1% to 10.0%
- Displays separate totals for each foam concentrate
- Low concentrate warning
- Water flow rate
- Total water used
- Percent of foam concentrate
- Total concentrate used
- Dual foam capability and calibration
Options available:- Concentrate Management Systems
- MultiFlo
- Remote Start/Stop for pump and roll applications
- Dual-Injection Selector
- Advanced Feature Controller
*Note: FoamPro systems will pump all known Class A and Class B Aqueous Film Forming Foam (AFFF) to capacity. Many brands of Alcohol Resistant-Aqueous Film Forming Foam (AR-AFFF) exhibit higher viscosity characteristics due to chemical composition and polymers. As viscosity increases, diminished flow may affect pump performance. Because of numerous variables including pump design, foam cell configuration, inlet piping/components and system layout; please contact FoamPro for application specific recommendations when foam viscosities of 2000 cps or higher are used.2001 2002 Foam Pump: Hyrpo Triplex Plunger Pump Hypro Triplex Plunger Pump Foam Output: 2.6 gpm @ 150 psi
(9.84 L/min @ 10.3 BAR)2.6 gpm @ 150 psi
(9.84 L/min @ 10.3 BAR)Pump Motor: 1/2 hp (.40 Kw) 12 & 24 volt DC 3/4 hp (.56 Kw) 12 & 24 volt DC Max Operating Pressure: 400 psi (27.6 BAR) 400 psi (27.6 BAR) Max Opearting Temp: 160 degrees F (71 degress C) 160 degrees F (71 degrees C) Max Amp Draw: 40 amps @ 12 volt DC
21 amps @ 24 volt DC56 amps @ 12 volt DC
30 amps @ 24 volt DCFoam Concentration: 2001 Max Water Flow: 2002 Max Water Flow: 0.2% 1,300 gpm (4,921 L/min) 2,500 gpm (9,464 L/min) 0.5% 520 gpm (1,968 L/min) 1,000 gpm (3,785 L/min) 1.0% 260 gpm (984 L/min) 500 gpm (1,893 L/min) 3.0% 85 gpm (322 L/min) 166 gpm (628 L/min)
System Capacity:Class A Foam Concentration: Class B Foam Concentration: 2001 Max Coverage per Critical Application Rate (Iowa Formula): 2002 Max Coverage per Critical Application Rate (Iowa Formula): 0.2% - 130,000 cubic feet 250,000 cubic feet 0.5% - 52,000 cubic feet 100,000 cubic feet 0.1% - 26,000 cubic feet 50,000 cubic feet
Hydrocarbon @ 0.10 gpm/sq. ft.Class A Foam Concentration: Class B Foam Concentration: 2001 Max Coverage per Critical Application Rate (Iowa Formula): 2002 Max Coverage per Critical Application Rate (Iowa Formula): - 1.0% 2,600 square feet 5,000 square feet - 3.0% 850 square feet 1,660 square feet
Polar Solvent @ 0.20 gpm/sq. ft.Class A Foam Concentration: Class B Foam Concentration: 2001 Max Coverage per Critical Application Rate (Iowa Formula): 2002 Max Coverage per Critical Application Rate (Iowa Formula): - 3.0% 425 square feet 830 square feet -
Reviews
Reviews
Be the first to
Leave a Review