Hale HPX300-B18 Skid Mount Firefighting Pump



The Hale HPX300-B18 Skid Mount Firefighting Pump is a medium pressure, medium volume fire pump.

Flows:
350 GPM @ 40 PSI
225 GPM @ 75 PSI
120 GPM @ 100 PSI

The pump body and head are coupled together with a stainless steel bank clamp which allows for quick pump removal for servicing.

X Base Features:

• Maxstream pump without base fuel tank - configured for easy installation by truck builders
• Exhaust primer
• Electric Start with manual recoil backup
• Mounted to a steel skid base plate that can easily be mounted into any vehicle
• Rail base includes all required hardware and vibration isolators
• Control Panel (ships loose) with mounted single discharge gauge and engine controls is included as standard
• 6' wiring harness

Control Panel:

• Discharge gauge
• Priming lever
• Start button
• ON/OFF switch
• Oil warning light
• Choke
• Throttle control

Features:

• Flows ranging from 120 GPM @ 100 PSI to 350 GPM @ 40 PSI
• Ultra-reliable Briggs & Stratton 18-HP 4-cycle V-Twin gasoline engine
• Electric start with recoil backup
• Anodized aluminum alloy pump head and body
• Pump head and body coupled together with stainless steel band clamp for easy serviceability
• Bronze impeller and renewable wear rings
• Self-adjusting mechanical seal
• Exhaust gas venturi priming
• 3.0" NPT / 4.0" Victaulic suction connection; 3.0" NPT discharge

Specifications:

Length:		21 inches
Width:		18 inches
Height:		20 inches
Weight:		163 lbs (74 kg)
Suction Connection:		3.0" Female NPT / 4.0" Victaulic
Discharge Connection:		3.0" Female NPT
Body and Head:		Lightweight, high strength, anodized aluminum
Pump Shaft:		Engine shaft with bronze sleeve
Impeller:		Enclosed type, silicon bronze
Clearance Rings:		Renewable type, bearing bronze
Gear Box:		Direct drive
Priming:		Exhaust venturi
Type:		Low Pressure, High Volume
Max Pressure (PSI):		120 PSI
Max Flow (GPM):		375 GPM