Kussmaul Pump Plus Kit w/Auto Charge 1000 Kussmaul Pump Plus Kit w/Auto Charge 1000 Kussmaul Pump Plus Kit w/Auto Charge 1000 Kussmaul Pump Plus Kit w/Auto Charge 1000
Kussmaul

Kussmaul Pump Plus Kit w/Auto Charge 1000

Current Stock:
SKU: KM-51-21-1100

Kussmaul Pump Plus Kit

The Kussmaul Pump Plus Kit provides a complete vehicle charging system at an affordable price.

Pump Plus Kit includes:

  • Kussmaul Auto Charge 1000 PP PLC
  • Display
  • Kussmaul 12v Auto Pump


The Kussmaul 12v Auto Pump is a small air compressor designed to maintain the air pressure in air brake systems when the vehicle is not in use. A pressure switch senses when the system pressure drops and starts the compressor which then runs until pressure is restored. All ball bearing construction, lubricated for life, assures reliable operation and requires no servicing.

Specification:

PSI 100
Input Voltage 12
Orientation Horizontal
Input 12 Vdc at 11 Amps Max
Output .30 SCFM at 80 PSI, .35 SCFM at 60 PSI
Warranty 1 Year
Weight 6 Lbs
Motor Type Perm. Magnet. 10 HP
Pressure Switch Adjustable Set-Point, Factory Set to 75 PSI Cut-In, 95 PSI Cut-Out

 

The Kussmaul Auto Charge 1000 PP PLC with Parasitic Load Compensation (PLC) is a compact, microprocessor controlled, completely automatic, single channel battery charger designed for vehicles with a single battery system.

This new Parasitic Load Compensation feature is designed especially to meet the heavy duty requirements of emergency vehicles. Most emergency vehicles have many parasitic loads on their systems (flash lights, gas detectors, computers, monitoring systems and other items) that can trick a standard 3 step charger into over charging the batteries. Parasitic load compensation allows you to input the total number of parasitic load amps on the vehicle. Then the charger will shift the absorption stage set point so the battery voltage will drop to the float voltage when the desired current is reached. In short the parasitic loads are invisible to the charger. This will lead to a longer battery life and no overcharging or overheating.

The Battery Saver contained in the Pump Plus 1000 PLC charger is a 3 Amp power supply with a relay to remove the accessory loads from the battery and connect them to the power supply when the charger is energized with A.C. power. This permits the charger to recharge the batteries without supplying the accessory load.

A Dip Switch is provided on the charger to operate an Auto Pump 12V either as a D.C. compressor or as an A.C. compressor. In either switch position the compressor operates from the vehicle's battery. When "D.C." is selected, the compressor operates whenever the pressure switch senses low system pressure. This is useful when parking the vehicle away from the 120 volt input power. For those operators who wish to limit compressor operation to the times when the shoreline is connected to the vehicle, the Dip Switch should be placed in the "A.C." position. This will operate the compressor when the A.C. power is available, but shuts off the compressor when the shoreline is removed.

Charging Output Amperage 15
Battery Saver 3 Amp
PLC Yes
Remote Display Included Yes
Hz 60
Input Fuse 6 Amps, Fast Blow
Input 120 Vac, 60 Hz, 3.5 Amps Max
Output Fuse 30 Amps (Part Number: 090-0040-0)
Warranty 3 Years
Weight 11 Lbs
Charge Indicator Options Remote Bar Graph Display, Deluxe Status Center, Or Watertight Status Center
Battery Type Selection Switches Lead-Acid, Gelled Electrolyte (Gel Cell), AGM Or Odyssey
Remote PLC Sensing Electronic, Sense Lines Not Required
Power LED Status Indicator Green LED, Indicates 120 Volt AC Power Applied
System LED Status Indicator Yellow LED, See Instruction Manual For Details
Torque DC Output Connector 15 In/Lbs
Output Power Battery: 12 Vdc, 15 Amps (18 Amps If Battery Saver Is Turned Off)
Output Power - Battery Saver 13 Vdc, 3 Amps
EV Series No


Full Description
SKU: KM-51-21-1100
Qty
  • Description

    Kussmaul Pump Plus Kit

    The Kussmaul Pump Plus Kit provides a complete vehicle charging system at an affordable price.

    Pump Plus Kit includes:

    • Kussmaul Auto Charge 1000 PP PLC
    • Display
    • Kussmaul 12v Auto Pump


    The Kussmaul 12v Auto Pump is a small air compressor designed to maintain the air pressure in air brake systems when the vehicle is not in use. A pressure switch senses when the system pressure drops and starts the compressor which then runs until pressure is restored. All ball bearing construction, lubricated for life, assures reliable operation and requires no servicing.

    Specification:

    PSI 100
    Input Voltage 12
    Orientation Horizontal
    Input 12 Vdc at 11 Amps Max
    Output .30 SCFM at 80 PSI, .35 SCFM at 60 PSI
    Warranty 1 Year
    Weight 6 Lbs
    Motor Type Perm. Magnet. 10 HP
    Pressure Switch Adjustable Set-Point, Factory Set to 75 PSI Cut-In, 95 PSI Cut-Out

     

    The Kussmaul Auto Charge 1000 PP PLC with Parasitic Load Compensation (PLC) is a compact, microprocessor controlled, completely automatic, single channel battery charger designed for vehicles with a single battery system.

    This new Parasitic Load Compensation feature is designed especially to meet the heavy duty requirements of emergency vehicles. Most emergency vehicles have many parasitic loads on their systems (flash lights, gas detectors, computers, monitoring systems and other items) that can trick a standard 3 step charger into over charging the batteries. Parasitic load compensation allows you to input the total number of parasitic load amps on the vehicle. Then the charger will shift the absorption stage set point so the battery voltage will drop to the float voltage when the desired current is reached. In short the parasitic loads are invisible to the charger. This will lead to a longer battery life and no overcharging or overheating.

    The Battery Saver contained in the Pump Plus 1000 PLC charger is a 3 Amp power supply with a relay to remove the accessory loads from the battery and connect them to the power supply when the charger is energized with A.C. power. This permits the charger to recharge the batteries without supplying the accessory load.

    A Dip Switch is provided on the charger to operate an Auto Pump 12V either as a D.C. compressor or as an A.C. compressor. In either switch position the compressor operates from the vehicle's battery. When "D.C." is selected, the compressor operates whenever the pressure switch senses low system pressure. This is useful when parking the vehicle away from the 120 volt input power. For those operators who wish to limit compressor operation to the times when the shoreline is connected to the vehicle, the Dip Switch should be placed in the "A.C." position. This will operate the compressor when the A.C. power is available, but shuts off the compressor when the shoreline is removed.

    Charging Output Amperage 15
    Battery Saver 3 Amp
    PLC Yes
    Remote Display Included Yes
    Hz 60
    Input Fuse 6 Amps, Fast Blow
    Input 120 Vac, 60 Hz, 3.5 Amps Max
    Output Fuse 30 Amps (Part Number: 090-0040-0)
    Warranty 3 Years
    Weight 11 Lbs
    Charge Indicator Options Remote Bar Graph Display, Deluxe Status Center, Or Watertight Status Center
    Battery Type Selection Switches Lead-Acid, Gelled Electrolyte (Gel Cell), AGM Or Odyssey
    Remote PLC Sensing Electronic, Sense Lines Not Required
    Power LED Status Indicator Green LED, Indicates 120 Volt AC Power Applied
    System LED Status Indicator Yellow LED, See Instruction Manual For Details
    Torque DC Output Connector 15 In/Lbs
    Output Power Battery: 12 Vdc, 15 Amps (18 Amps If Battery Saver Is Turned Off)
    Output Power - Battery Saver 13 Vdc, 3 Amps
    EV Series No


  • Reviews

    Reviews

    Be the first to