Milnor M758V 75-lb Capacity OPL Dryer
Milnor

Milnor M758V 75-lb Capacity OPL Dryer

Current Stock:
SKU: MILNOR-M758V

Milnor M758V 75-lb Capacity OPL Dryer

The Milnor M758V 75-lb Capacity OPL Dryer is constructed as one solid piece of steel with gasketless glass, to eliminate the issue of glass falling out due to wear and tear, adding durability and longevity.

Features:

  • 75-lb. capacity
  • 21.50 cu. ft basket volume
  • 175,000 Btu/hr heat input, 1,000 cfm airflow
  • Radial airflow
  • Steel door with gasketless glass
  • 8” diameter vent connection
  • Easy to clean lint drawer
  • Available in gas, steam and electric heat


Specifications Sheet Link

Specifications:

Capacity:    75 lb. (34 kg)
Width:    38-1/4" (972 mm)
Depth:    48" (1219 mm)
Height:    75.12" (1908 mm)
Door Opening:    31.38" (797 mm)
Weight:    721 lb. (327 kg)
Cylinder:    Single Pocket
Cylinder Diameter:    36-1/4" (921 mm)
Cylinder Depth:    36" (914 mm)
Cylinder Volume:    21-1/2 cu. ft. (609 L)
Heat Source:    Gas, Steam, Electricity
Drive Motor:    1 HP (0.75 kW)
Blower Motor:    1 HP (0.75 kW)
Exhaust Connection:    8" (203 mm)
Eco Dry:    No
Roller Drive:    No
Markets:    OPL



Efficient Automatic or Manual Mode:
Automatic drying helps prevent over-drying and helps eliminate guesswork.

Smart Lint Monitor:
For models with lint drawers, the control automatically prompts the operator to clean the lint. If signals are ignored, the dryer will not operate after a maximum number of cycles.

Ignition Retries:
If the dryer doesn't ignite, it will wait and try again (up to two retries).

Anti-wrinkle Cooldown:
When drying time has ended, this mode tumbles the goods without heat to reduce wrinkling and significantly reduce the risk of spontaneous combustion.

Informative Display:
Display allows you to view drum temperature. You can also preview all operations of pre-programmed cycles and see troubleshooting information.

Safety Features:
Phase 7 technology provides an optional Fire Suppression System (cold weather FSS also optional) to protect against fire damage caused by spontaneous combustion. The system senses an abnormal rise in temperature and quickly activates a water jet system and turns the basket to extinguish the fire. If for some reason the fire re-ignites, FSS will reactivate to ensure the fire is completely out.

Additional safeties:
multi-point high temperature monitoring that will shut off the burner if the temperature
exceeds the set point parameters.



*INSPECT BEFORE YOU SIGN:

Please forward this information to the proper department/people so they are aware of what to do when the shipment arrives.

Due to the size, damages can occur on the inside of the packaging, due to improper handling by the carrier. Please BE AWARE upon arrival that there may be possible damage even if the basic packaging looks to be in good condition.

Please inspect all items & all sides in your shipment before you sign the truck driver’s delivery tablet/receipt. Packaging should be fully opened to view all sides of shipment. You have 30 minutes to do this before extra charges are added as the driver cannot be detained for hours while you raise/use item(s). If the truck driver refuses full inspection, do not sign the delivery tablet/receipt and ask to speak with the local freight terminal manager. Ask them to mark as damaged stating inspection was not allowed or refuse the shipment completely.

If the contents are in good condition, sign and date the driver's delivery tablet/receipt

If the contents/packaging is damaged, WRITE on the delivery tablet/receipt "DAMAGED" and as much detail(s) of actual damage; sign/date.

Accept any undamaged shipments when possible and only refuse damaged packages. The driver should give you a copy of the delivery receipt for your records.

Please contact us for further assistance before the driver leaves. If the shipment is damaged and the delivery receipt has been signed clear without any notation of damage, any possible rights to full payment on the freight claim are void.

The factory will not and cannot pay for freight company damages.

Full Description
SKU: MILNOR-M758V
Choose *
LTL Truck Delivery *
Voltage *
Qty
  • Description

    Milnor M758V 75-lb Capacity OPL Dryer

    The Milnor M758V 75-lb Capacity OPL Dryer is constructed as one solid piece of steel with gasketless glass, to eliminate the issue of glass falling out due to wear and tear, adding durability and longevity.

    Features:

    • 75-lb. capacity
    • 21.50 cu. ft basket volume
    • 175,000 Btu/hr heat input, 1,000 cfm airflow
    • Radial airflow
    • Steel door with gasketless glass
    • 8” diameter vent connection
    • Easy to clean lint drawer
    • Available in gas, steam and electric heat


    Specifications Sheet Link

    Specifications:

    Capacity:    75 lb. (34 kg)
    Width:    38-1/4" (972 mm)
    Depth:    48" (1219 mm)
    Height:    75.12" (1908 mm)
    Door Opening:    31.38" (797 mm)
    Weight:    721 lb. (327 kg)
    Cylinder:    Single Pocket
    Cylinder Diameter:    36-1/4" (921 mm)
    Cylinder Depth:    36" (914 mm)
    Cylinder Volume:    21-1/2 cu. ft. (609 L)
    Heat Source:    Gas, Steam, Electricity
    Drive Motor:    1 HP (0.75 kW)
    Blower Motor:    1 HP (0.75 kW)
    Exhaust Connection:    8" (203 mm)
    Eco Dry:    No
    Roller Drive:    No
    Markets:    OPL



    Efficient Automatic or Manual Mode:
    Automatic drying helps prevent over-drying and helps eliminate guesswork.

    Smart Lint Monitor:
    For models with lint drawers, the control automatically prompts the operator to clean the lint. If signals are ignored, the dryer will not operate after a maximum number of cycles.

    Ignition Retries:
    If the dryer doesn't ignite, it will wait and try again (up to two retries).

    Anti-wrinkle Cooldown:
    When drying time has ended, this mode tumbles the goods without heat to reduce wrinkling and significantly reduce the risk of spontaneous combustion.

    Informative Display:
    Display allows you to view drum temperature. You can also preview all operations of pre-programmed cycles and see troubleshooting information.

    Safety Features:
    Phase 7 technology provides an optional Fire Suppression System (cold weather FSS also optional) to protect against fire damage caused by spontaneous combustion. The system senses an abnormal rise in temperature and quickly activates a water jet system and turns the basket to extinguish the fire. If for some reason the fire re-ignites, FSS will reactivate to ensure the fire is completely out.

    Additional safeties:
    multi-point high temperature monitoring that will shut off the burner if the temperature
    exceeds the set point parameters.



    *INSPECT BEFORE YOU SIGN:

    Please forward this information to the proper department/people so they are aware of what to do when the shipment arrives.

    Due to the size, damages can occur on the inside of the packaging, due to improper handling by the carrier. Please BE AWARE upon arrival that there may be possible damage even if the basic packaging looks to be in good condition.

    Please inspect all items & all sides in your shipment before you sign the truck driver’s delivery tablet/receipt. Packaging should be fully opened to view all sides of shipment. You have 30 minutes to do this before extra charges are added as the driver cannot be detained for hours while you raise/use item(s). If the truck driver refuses full inspection, do not sign the delivery tablet/receipt and ask to speak with the local freight terminal manager. Ask them to mark as damaged stating inspection was not allowed or refuse the shipment completely.

    If the contents are in good condition, sign and date the driver's delivery tablet/receipt

    If the contents/packaging is damaged, WRITE on the delivery tablet/receipt "DAMAGED" and as much detail(s) of actual damage; sign/date.

    Accept any undamaged shipments when possible and only refuse damaged packages. The driver should give you a copy of the delivery receipt for your records.

    Please contact us for further assistance before the driver leaves. If the shipment is damaged and the delivery receipt has been signed clear without any notation of damage, any possible rights to full payment on the freight claim are void.

    The factory will not and cannot pay for freight company damages.

  • Reviews

    Reviews

    Be the first to