-
Description
Milnor MWT27X5 Washer-Extractor, 60 lbs Capacity, Hard Mount
The Milnor 60 lbs Capacity Washer Extractor is tested for a minimum of 1,000 consecutive hours in a high-extract, out-of-balance state - ensuring your machine is tough and will stand up to years of use.
Specification Sheet Link
Specifications:Suspension: Rigid Controller: E-P Express Capacity: 60 lb.(27 kg) Width: 34.45 in.(875 mm) Depth: 51.75 in.(1314 mm) Height: 56.25 in.(1429 mm) Door Opening: 15.70 in.(399 mm) Shipping Weight: 1164 lb.(528 kg) Cylinder Diameter: 30 in.(762 mm) Cylinder Depth: 22 in.(559 mm) Cylinder Volume: 9 cu. ft.(255 L) Wash Speed: 38 rpm Distribution Speed: 65 rpm Extraction Speed: 485 rpm Extraction G-Force: 100 Gs Drive Motor: 4 HP(2.98 kW) Inlet Connection: 0.75 in.(19 mm) Drain Valve: 3 in.(76 mm) Markets: OPL
Save on Labor:
E-P Express®control:
This median control with 30 programmable formulas provides flexibility and bright display allows operator to choose from real words, not codes. Standard controller features English/Spanish (other languages optional). Controller also provides diagnostic and error messages which shorten training time of new employees and allows for fewer operator errors
Process Times:
Milnor's microprocessors and software are fast and reliable allowing for quick processing of programmed formulas. Faster process times mean less time processing linen.
Cylinder Volume:
A larger cylinder volume than most competitive 20 lb. capacity washer-extractors provides greater productivity through enhanced mechanical action, thorough rinsing and improved extraction. The result is more linen washed per day, or fewer hours required to process the linen.
Save on Linen Replacement Costs:
Safe Chemical Injection System:
Chemicals are injected in the rear of the machine (unlike certain brands where chemicals are injected near the front of the machine at eye-level). Chemicals are diluted and flushed into the sump of the washer-extractor so that raw chemical does not come in direct contact with the linen or the stainless steel.
Save Energy:
Proper Cylinder Design:
Milnor's bigger cylinder perforations provide better wash quality by promoting excellent interchange of the goods with water and chemistry, better rinsing by allowing rinse water to freely interact with the goods, and better extraction by allowing water to escape from goods easily and quickly. All components work together to ensure fewer costly rewashes and less drying time.
Frequency Drive System:
A simple single-motor inverter drive reaches maximum extraction speed more gradually and efficiently, reducing peak electricity amperage draw compared to multi-speed motor machines.
Save Water:
Three Simple Fast Fill Water Valves:
Simple hot and cold water inlets are used to quickly fill the washer without fill level overshoot. A third water inlet is used to thoroughly dilute chemicals so that raw chemical does not directly contact and damage linens.
Proper Cylinder Design:
Perforation pattern and perforated ribs allow for rapid exchange of water with the goods, efficiently utilizing the water.
Save Money (Total Cost of Ownership):
Value-Priced:
Low initial capital ownership coupled with proven Milnor engineering makes the MWT27X5 an excellent choice for your laundry.
Long Machine Life:
Milnor machines typically last longer because of their legendary ruggedness, thoughtful design and dependable quality.
Bearings:
Tapered roller bearings have a large contact area - spreading force and contributing to long life. Front and rear bearings are fixed in the same housing, preventing damaging misalignment. And, a pressed-on basket means it does not need to be replaced when a bearing change becomes necessary. Milnor's bearing design is long proven while other companies keep experimenting.
L10 Life:
Every Milnor design model is tested for a minimum of 1,000 consecutive hours in a high-extract, out-of-balance state - ensuring your machine is tough and will stand up to years of use.Gear Wash Turnout Detergent
Developed specifically for Structural Turnouts and other fire rated Personal Protective Equipment (PPE) garments, Turnout Gear Wash has been formulated for the safe cleaning of advanced FR fabrics, reflective materials and hardware used on PPE.Features:
• pH = 9.2
• Meets the current requirements of NFPA 1851 standard for cleaning solutions
• Environmentally friendly and contains no phosphates
• Will not corrode metal hardware
• Will not degrade the retro-reflectivity of reflective trim
• Will not degrade fire rated protective fabrics
• Passed the recommended tests for outer shell, moisture barrier and thermal liner*INSPECT BEFORE YOU SIGN:
Please forward this information to the proper department/people so they are aware of what to do when the shipment arrives.
Due to the size, damages can occur on the inside of the packaging, due to improper handling by the carrier. Please BE AWARE upon arrival that there may be possible damage even if the basic packaging looks to be in good condition.
Please inspect all items & all sides in your shipment before you sign the truck driver’s delivery tablet/receipt. Packaging should be fully opened to view all sides of shipment. You have 30 minutes to do this before extra charges are added as the driver cannot be detained for hours while you raise/use item(s). If the truck driver refuses full inspection, do not sign the delivery tablet/receipt and ask to speak with the local freight terminal manager. Ask them to mark as damaged stating inspection was not allowed or refuse the shipment completely.
If the contents are in good condition, sign and date the driver's delivery tablet/receipt
If the contents/packaging is damaged, WRITE on the delivery tablet/receipt "DAMAGED" and as much detail(s) of actual damage; sign/date.
Accept any undamaged shipments when possible and only refuse damaged packages. The driver should give you a copy of the delivery receipt for your records.
Please contact us for further assistance before the driver leaves. If the shipment is damaged and the delivery receipt has been signed clear without any notation of damage, any possible rights to full payment on the freight claim are void.
The factory will not and cannot pay for freight company damages.
-
Reviews
Reviews
Be the first to
Leave a Review