Waterous PB18-G2015B 18HP Briggs & Stratton Fire Pump, High Pressure / Low Volume
Waterous PB18‐G2015
Enhance Your Wildland/Attack Fire Suppression Capabilities

Designed for wildland/attack fire suppression, the rugged and powerful Waterous PB18‐G2015 is a gear‐driven centrifugal pump powered by a V‐twin Briggs and Stratton 18 HP (13.4 kW) engine. The PB18‐G2015 also comes with a two‐year warranty and is CE marked.

PUMP SPECIFICATIONS:
Type: Wildland ‐ Attack

Gear Case:
Two‐gear speed increaser utilizing high‐strength aluminum alloy case, helical cut, hardened steel gears and anti‐friction bearings

Intake:
2 inch female NPT

Discharge:
Ball valve with 1‐1/2 inch female NPT (G2015B)

Console:
Operator's panel includes discharge pressure gauge, compound intake pressure gauge, low oil pressure warning light, start and stop control, speed control panel light and 12 volt outlet.

Volute Body and Head:
High‐strength aluminum alloy, anodized for superior corrosion
resistance.

Impeller:
High‐strength, corrosion‐resistant bronze, fully‐enclosed, double‐hubbed to balance hydraulic thrust, mechanically balanced to eliminate vibration

Wear Rings:
Long wearing bronze. Easy to replace when required to restore original
pump efficiency.

Shaft Sleeve:
High‐strength stainless steel

Shaft Seal:
Spring‐loaded mechanical type

Priming:
Combination spark arresting muffler and exhaust primer, fast and easy to use. Quarter turn bronze priming valve operates with push/pull knob

Warranty:
Waterous Two‐Year Limited Warranty


ENGINE SPECIFICATIONS:
Engine:
Briggs & Stratton, model 356447, Vanguard V‐Twin air cooled, overhead valve (OHV) design delivers a maximum output of 18 HP (13.4 kW) @ 3600
RPM. 34.75 cu. in. (570 cc) displacement, 4‐cycle, gasoline fueled, horizontal shaft

Lubrication:
Full pressure lubrication system with an automotive style oil filter. Oil fill tube with dipstick

Starter:
12‐volt electric and manual recoil.

Alternator:
16 A


BASES:
Rail:
Rigid steel channels. Control panel and fuel tank shipped loose.

No Base:
Control panel and fuel tank shipped loose.


FUEL TANK:
Rail or No Base Models:
All PB18 models (except PB18‐LE) with Rail or No Base will have a shipped‐loose, 3‐gallon (11 liter) fuel tank that meets the EPA evaporative requirement (40 CFR Part 1060)


Approximate Dimensions and Weights